| 系統 | | 處理器 | Zhaoxin E KX-6000 series
KX- 6640A 4core 2.6 GHz BGA CPU TDP 35W
KX- 6640MA 4core 2.2 GHz BGA CPU TDP 25W
| | 記憶體 | 2 x 260-Pin DDR4 2666MHz SO-DIMM, supports 8G/16G & up to 32GB (Non-ECC) | | I/O 晶片 | I/O extended IC ZX-200 (optional) | | BIOS | AMI BIOS, 64 Mbit SPI Flash ROM
(Not support BIOS Boot Selection (BIOS_DIS0#, BIOS_DIS1#) | | 看門狗計時器 | H/W Reset, 1sec. ~ 65535sec. and 1sec./step | | 硬體狀態監控 | Monitoring System Temperature, Voltage and FAN Status with Auto Throttling Control | | TPM | TCM (Nations IC-Z32H330TC-SQN-611) Optional,support under Linux and from Windows 10 RS3 version | | I/O | | USB Port | Max. 6 x USB 2.0
(*Up to Max. 8 x USB 2.0 only on models KX- 6640A & KX- 6640MA with ZX-200)
Max. 2 x USB3.0
(*Up to Max. 4 x USB3.0 Gen.1 (5 Gbps) only on models KX- 6640A & KX- 6640MA with ZX-200) | | SMBus | SMBus | | SATA | Max.2x SATAIII 6.0Gb/s
(*Max. 4 x SATAIII 6.0Gb/s (when KX- 6640A+ ZX-200 & KX- 6640MA+ ZX-200)
| | DIO | 8bit GPIO, WDG/HW monitor/FAN | | UART | 2 x UART(2-wire) | | PCIe | KX- 6640A
Configuration1：5PCIEX1+1PCIEX8 (default)
Configuration2：5PCIEX1+2PCIEX4
Configuration3：1PCIEX1+1PCIEX4+1PCIEX8
Configuration4：1PCIEX1+3PCIEX4
Configuration5：3PCIEX1+1PCIEX2+1PCIEX8
KX- 6640MA (CPU TDP will change from 25W to 26W when use PCIex8)
Configuration1：5PCIEX1+1PCIEX8 (default)
Configuration2：1PCIEX1+1PCIEX4+1PCIEX8
Configuration3：3PCIEX1+1PCIEX2+1PCIEX8
KX- 6640A+ZX200
Configuration1：4PCIEX1(Gen2) (default)
Configuration2：1PCIEX4 (Gen2)
KX- 6640MA+ZX200
Configuration1：4PCIEX1(Gen2) (default)
Configuration2：1PCIEX4 (Gen2)
| | 其他 | LPC, I2C | | 顯示 | | 晶片組 | N/A | | 解析度 | HDMI 2.0: 4096 x 2160 @ 60Hz (only 3840x2160@60Hz is tested, 4096 x 2160 @ 60Hz needs to be further validated when device is available)
DP 1.2a: 4096 x 2304 @60Hz, (only 3840 x 2160@60Hz is tested, 4096 x 2160 @ 60Hz needs to be further validated when device is available)
LVDS (via eDP-to-LVDS 7511 IC): 1920x1080 @60Hz, Dual-channel 18/24-bit
VGA: 1920x1080 @60Hz
| | 多顯 | Supporting 3 display (2 display with clone mode, 1 display with extend mode)
LVDS (HDMI or DP) + VGA + DDI (HDMI or DP)
| | 數位顯示介面 | HDMI/DP | | 乙太網路 | | 晶片組 | 1xIntel 210AT Gigabit Ethernet
| | 機構 & 使用環境 | | 工作溫度 | 0 ~ 60 °C (32 ~ 140 °F), with airflow 0.5m/s
Extended temp.(Optional), -40 ~+60 °C (-40 ~ 140 °F) | | 儲存溫度 | -40°C ~ 75°C (-40°F ~ 167°F) | | 工作濕度 | 40°C @ 95% Relative Humidity, Non-condensing | | 重量 | 0.44lbs (0.2kg) | | 電源需求 | +9~ +19V | | ACPI | Single power ATX Support S0, S3, S5
ACPI 5.0 Compliant | | 電源類型 | AT/ATX | | 尺寸 (L x W) | 125 x 95 mm (3.74” x 4.92”) | | 支援軟體 | | 作業系統資訊 | Microsoft® Windows 10 64-bit/Windows 7
Linux (NeoKylin DT V7.0), Ubuntu 16.04.5
| | 訂購資訊 | | 訂單資訊 | ESM-ZXE-6640A-A1R Zhaoxin COM Express Module Type 6 on board KX-6640A CPU (0~+60 degrees), without TCM ESM-ZXE-6640MA-A1R Zhaoxin COM Express Module Type 6 on board KX-6640MA CPU (0~+60 degrees),without TCM
ESM-ZXE-40AZ-A1R Zhaoxin COM Express Module Type 6 on board KX-6640A CPU+ZX-200 (0~+60 degrees),without TCM ESM-ZXE-40MAZ-A1R Zhaoxin COM Express Module Type 6 on board KX-6640MA CPU+ZX-200 (0~+60 degrees),without TCM EEV-EX16-B1R
mATX Ev. Board for COMe Type 6 A1 ACC-ESMZXE-CL-1R Cooler for ESM-ZXE W/FAN H=61mm ACC-ESMZXE-CL-2R Cooler for ESM-ZXE W/FAN H=61mm with pad for board with ZX-200
ACC-ESMZXE-SD-1R
Heatspreader for ESM-ZXE H=8 mm
ACC-ESMZXE-SD-2R
Heatspreader for ESM-ZXE H=8 mm with pad for board with ZX-200 |
|